How to use less gas

If you want to know how to use less gas with your car , you have come to the right place. Fuel consumption can represent a significant expense, especially for those who need to use the car regularly or to travel long distances.

Now, not all the tips you can read about saving gas are necessarily correct. That is why, in this article, I am going to present you an exhaustive list of:

  • Those techniques that you can use to use less gasoline.
  • The main myths about how to use less gas.

How do you use less gasoline?

Use efficient driving techniques

The first piece of advice I can give you is to incorporate efficient driving techniques.
You can read our super efficient driving guide here.

However, here are some of the best efficient driving tips on how to use less gas on the road.

Use high gears for most of the trip, as long as the engine does not drop below 1,000 rpm, as in those cases, the mechanics will be straining and probably will be consuming more fuel than necessary. • Take advantage of the slopes downhill to drive with the gear engaged but without pressing the accelerator. As long as the vehicle is traveling at more than 20 km / h and it is not endangering itself or making it difficult to circulate on the road, it is possible to save fuel by letting the vehicle move by its own inertia.

When leaving a gear engaged, the engine will continue to rotate without the need for the electronic control unit to inject a single drop of fuel. On the contrary, dropping the vehicle in neutral will force the centralization to keep the engine at idle to avoid stalling. For this purpose, it will be necessary to inject an average of between 0.4 and 0.9 liters of fuel per hour.

Anticipate braking maneuvers by letting the engine brake slow down the car

Take your foot off the gas pedal early enough for the engine braking effect to help slow the car down.

Depending on the characteristics of the road, the speed of the vehicle can be reduced to below 50 km / h without having to press the brake pedal. In this way, you will avoid unnecessary fuel consumption, as well as brake wear.

Use smart refueling

Smart refueling involves a series of recommendations aimed at economizing fuel consumption as much as possible.

First of all, it is best to fill the fuel tank completely whenever you go to the service station. After all, doing a partial refueling only creates the false illusion that you are saving fuel that sooner or later will have to be paid for.

Precisely, the second reason to fill the gas tank completely is to reduce the number of times you go to a gas station . It must be taken into account that each trip made expressly to refuel supposes an unnecessary increase in fuel consumption.

In line with the above, it is also recommended to take advantage of the usual trips – such as the commute to work or a certain trip – to refuel the vehicle. In this way, you can save on useless trips to the gas station.

On the other hand, it is advisable to wait until three quarters of the fuel tank has been consumed before refueling. This is due to several reasons:

On the one hand, a reduction in consumption is possible during the time you travel with a half empty gas tank. The reduction in weight means that the engine needs to develop less force to move the vehicle. • On the other hand, it is not recommended to completely empty the gas tank, since the fuel pump could become damaged. Replacing them would derail any effort to save by spending less gas.

Monitor tire pressure

Modern cars necessarily include sensors that warn the driver when the tire pressure is not adequate.

This circumstance can not only jeopardize driving safety, it also affects vehicle performance and increases fuel consumption.

Avoid using cruise control on winding or mountain roads

Cruise control is designed for use on motorways, highways and roads that allow constant speed for long periods of time.

However, on roads whose characteristics do not allow a constant speed, speed control will make it impossible to apply anticipation techniques or efficient driving. This includes the ability to allow the vehicle to pick up speed on downhill slopes or to anticipate braking on cornering sections.

Uses additives for the injection system

This type of additives are a chemical compound that, when mixed with the fuel, help to eliminate the ash and other impurities accumulated in the engine.

This prevents fuel consumption from rising unnecessarily and can prevent damage to the injection system. Their use is recommended every 30,000 kilometers and they have a very low cost.

What is not worth doing to consume less gasoline in the car

Driving with the windows down instead of with the air conditioning

This practice is only justified when driving at a considerably reduced speed or when the temperature inside the car is so high that it is necessary to carry out intensive ventilation of the vehicle.

In all other cases, using the vehicle’s air conditioning or forced ventilation system is more efficient and does not make a significant difference in fuel consumption.

Use economizers

Economizers are magnetized devices that, presumably, subject the fuel to a magnetic field that alters the chemical structure of the fuel and enables lower fuel consumption.

The truth is that several tests have been carried out with this type of gadget without being able to prove a reduction in gasoline consumption.
Now you have a large number of resources to spend less gasoline.

Categories Car

CarsNews4U.Net offers the latest news, tips and tricks, reviews, information about cars, services methods, and car dealerships about all sorts of cars, but main focusing essentially on cheap car rentals in the town market.

Leave a Comment